Uniden TRU548, Owner'S Manual

Page: 28 / 68

[ 22 ]
• In memory dialing
operation, you must
press a key within 20
seconds or the phone
will return to standby.
If you return the
handset to the base,
the phone will return
to standby also.
M E M O R Y D I A L I N G
Storing Phone Numbers and Names
Memory Dialing allows you to dial a number using just a few key presses.
Your TRU548 stores up to 20 names/numbers in the handset.
With the Handset
1 Press and hold until “
Memory Store
”
is displayed.
2 Press and or enter a two-digit number (01 - 20) to select the
memory location where you would like to store the number.
3 Press . The following screen appears and a
cursor flashes indicating that the display is ready for
the name to be entered.
If this screen appears, the selected memory location is
already stored. Then you must either change the entry
in this location, clear the entry in this location, or
select “
Go Back
” to choose another location.
4 Use number keys, , , or to enter the name. The
name cannot exceed 13 characters.
• See the “Steps for entering names and special characters”
(See pages 24-25).
• Use and to move the cursor to the desired location.
• Use to delete characters as needed.
• Press and hold to delete all the characters.
• If a name is not required, go to step 5.
ª
•
Memory Store
01
02
Store Name
Edit Memory07
Delete Memory07
Go Back
• You have 20 seconds
after pressing
to enter the number
you wish to store.
Otherwise, an error
tone sounds.
TRU548 ENG O/M 7/18/01 15:40 Page 22