Uniden TRU548, Owner'S Manual

Page: 46 / 68

[ 40 ]
Selecting the message record time
You can set your answering system to record messages up to one or
four minutes long.
One minute option: move the REC TIME switch to 1 .
Four minute option: move the REC TIME switch to 4 .
▼
Announce only feature:
The announce only feature plays an outgoing message, but it will not allow
the caller to leave a message. Move the
REC TIME switch to the ANN
position.
The message counter LED displays “
” when the system is on standby.
Prerecorded outgoing message for Announce only feature is:
For example: “Hello, no one is available to take your call.” (twice)
Selecting a PIN code
To play your messages from a remote location, you will need to enter a two-
digit Personal Identification Number (PIN) code (00-99). To select a PIN,
perform the following steps.
1 On the base, press and hold until a tone sounds and the LED
displays .
2 To set the first number, press or repeatedly to scroll from 0 to 9.
When the desired number appears in the display, press .
3 To set the second number, press or to scroll from 0 to 9. When the
desired number appears in the display, press . Then the entered PIN
code is announced.
Press and hold or
to quickly scroll
through numbers on
the display.
T H E I N T E G R AT E D A N S W E R I N G D E V I C E
TRU548 ENG O/M 7/18/01 15:43 Page 40