Uniden TRU548, Owner'S Manual

Page: 44 / 68

[ 38 ]
Turning the answering system on/off
1 To turn the answering system on, press . The
current greeting message will be played and you will
hear a tone. The message counter displays the number
of messages stored in memory. If the display flashes,
then there are new messages waiting for you.
2 To turn the answering system off, press again.
After the announcement “Answer Off” the message
counter display goes out.
• Press and hold or
to quickly scroll
through numbers on
the display.
• If you don’t complete
the clock setting
within two minutes,
the system returns to
standby.
• You must press a key
within 2 minutes or
the phone returns to
standby.
When the answering system is full, displays on the base and the system
announces “No remaining time”. You should delete some messages so that the system
can record new messages.
Setting Up Your Answering System
Setting the clock
The clock on TRU548 answering system starts when power is supplied to the
base. Follow these steps to set the clock to the correct time.
1 Press and hold until a tone sounds.
2 Press or repeatedly until the correct day of the week is announced.
(Number through displays on the base as each day is announced.)
Press again to select the day.
3 Press or repeatedly until you hear the correct hour setting. Numbers
through display on the base as each hour is announced. Press
again to select the correct hour.
4 Press or repeatedly until you hear the correct minute setting.
Numbers through display on the base as each minute is announced.
Press again to select the correct minute.
T H E I N T E G R AT E D A N S W E R I N G D E V I C E
TRU548 ENG O/M 7/18/01 15:42 Page 38