Page 72
3. Open the
tab and tap
.
4. The list of photos stored in the device appears. Select one photo from the list.
5. A full screen map appears with the selected point in the middle. If necessary,
tap the map somewhere else to modify the destination. The Cursor (
)
appears at the new location. Tap
to confirm the destination, or tap
to select a different destination.
6. After a short summary of the route parameters, the map appears showing
the entire route. The route is automatically calculated. Tap
to
modify route parameters, or tap
and start your journey.
NOTE
Only geotagged JPG files contain location information. That is why
these kind of files can only be used in navigation. Other picture files
do not appear in the list. Files must be located on an inserted SD card,
either in the root folder or in a “pictures” folder.
3.1.9 Building a route from the list of destinations (Create Route)
You can also build your route destination by destination from the My Route menu.
1. If you are on the Map screen, tap
to return to the Navigation menu.
2. In the Navigation menu, tap
.
3. Tap
.
Summary of Contents for IGO500
Page 131: ...Page 131 Notes...
