Uniden IGO500 Owner'S Manual Download

Page: 57 / 132

Page 57

• Tap

to search for a place within a selected city or town. (The

result list will be ordered by the distance from the centre of the selected

city/town.)

• Tap

to search for a place around the destination of the active

route. (The result list will be ordered by the distance from the destination.)

• Tap

to search along the active route, and not around a given

point. This is useful when you search for a later stopover that results in a

minimal detour only, such as searching for upcoming petrol stations or

restaurants. (The result list will be ordered by the length of the necessary

detour.)

5. (optional) If you have selected

, select the town/suburb to search in.

6. Select one of the main Place categories (e.g. Accommodation) or tap

to list all Places around the selected location or along the route.

Summary of Contents for IGO500





































































































































Search results

Summary of Contents for IGO500

Reviews:

Related manuals for IGO500

Brands by name

Popular brands

Uniden IGO500, Owner'S Manual

Search results

Summary of Contents for IGO500

Reviews:

Related manuals for IGO500

Brands by name

Popular brands