Page 115
Replace the default position marker to one of the 3D vehicle
models. You can select separate icons for different vehicle
types selected for route planning. Separate icons can be
used for car, pedestrian and the other vehicles.
Show or suppress 3D landmarks, 3D artistic or block
representations of prominent or well-known objects.
Show or suppress optional data of 3D city models, 3D artistic
or block representation of full city building data containing
actual building size and position on the map.
3D Terrain
Show or suppress the 3D elevation of the surrounding
terrain.
Turn on or off track log saving, that is, saving the sequence
of the locations your journeys go through.
Select which Places to show on the map while navigating.
Too many Places make the map crowded so it is a good idea
too keep as few of them on the map as possible. For this,
you have the possibility to save different Place visibility sets.
You have the following possibilities:
• Tap the checkbox to show or hide the Place category.
• Tap the name of the Place category to open the list of its
subcategories.
• Tap
to save the current Place visibility set or
to load a previously saved one. Here you can also revert to
the default visibility settings.
Summary of Contents for IGO500
Page 131: ...Page 131 Notes...
