Uniden Bearcat BCD396T, Owner'S Manual

Page: 57 / 154

57
Other Settings
Use the included connection cable to connect your
scanner to another BCD396T scanner or your per-
sonal computer.
Settings
PC Control
PC Control
Lets you set the baud rate your scanner
uses to communicate with a personal computer.
•
Off
The baud rate is not set.
•
9600 bps
The baud rate is set to 9600 bps.
•
19200 bps
The baud rate is set to 19,200 bps.
•
38400 bps
The baud rate is set to 38,400 bps.
•
57600 bps
The baud rate is set to 57,600 bps.
•
115200 bps
The baud rate is set to 115,200 bps.
Using the Cloning Options
Lets you set your scanner as a master (source) or
slave (recipient), letting you transfer programming to
or from another BCD396T scanner. See "Wired Clon-
ing" on Page 57 and "On-Air Cloning" on Page 58.
Wired Cloning
Xfer Information
Wired Clone
•
Master
Sets the scanner to be the source scanner.
•
Slave
Sets the scanner to be the recipient scanner.
To clone (copy) data directly from one BCD396T
scanner to another BCD396T scanner, you must first
connect the scanners to each other using the included
connection cables and a DB9 null modem adapter and
DB9 gender changer (neither included), available at
most computer stores. Then you must set one scanner
as the source and the other as the destination.
Plug the smaller end of each of the included connection
cables into
Remote on the right side of each scanner.
Then connect the other end of the cables together
using the null modem connector and gender changer.
Menu
Menu