background image

99

Searching and Storing

Set Lockout

 This setting controls whether 

the system is scanned when its quick key is 
enabled. Rotate the scroll control to select your 
setting, then press the scroll control.

Locked

 - the system is not scanned

Unlocked

 - the system is scanned

Note: You can also lock or unlock a system by 
pressing , 

selecting the system, then 

pressing  

L/O

.

Set Hold Time

 This setting controls how 

many seconds the scanner scans a system 
before moving to the next unlocked system. 
Enter a value from 0-255, then press the scroll 
control to save the setting.
Notes: 

• If you select 0, the scanner stays on the 

system for a minimal time (only long enough 
to check current system activity).

• The default setting is 2 seconds for each 

system.

• For conventional systems, all unlocked 

channels will be scanned at least once 
regardless of this setting.

• The scanner moves to the next system after 

the hold time expires, any current 
transmission ends, and the channel delay 
time expires.

Auto Search and Store

Your scanner’s Auto Store feature lets you search for 
new frequencies in custom search ranges or within a 
service search range on a conventional system, or 
new talk group ID’s on a trunked system.

Func

Func

Summary of Contents for Bearcat BCD396T



























































































































































Reviews: