Manual – Neon 2000 Family NRT & NRM
Unidata Manual - Neon 2000 Family Remote Terminals and Modules Issue 4.0.docx
Page 21
NRT Example which is secured within a Weatherproof Enclosure
Mount the NRT onto the plate, securing it with the four short machine screws as shown in
the figure above.
Rubber self-sealing glands are provided in the base of the enclosure for external wiring
connections. To keep the enclosure weatherproof, all wires leading to the NRT must pass
through these glands.
After feeding the wires from the external device through the rubber gland(s), connections
to the field termination strip (FTS) are required. Refer to the external device
documentation to determine the exact connections.
For example: A temperature sensor, which is an analogue device, should be connected to
an analogue channel (A0 or A1) as shown below.
Field Termination Strip with Analogue Device Connected
