Manual – Neon 2000 Family NRT & NRM
Unidata Manual - Neon 2000 Family Remote Terminals and Modules Issue 4.0.docx
Page 26
After removing the four screws, hold the end plate and carefully slide the casing away
from the end plate. If necessary push down gently on the antenna stub to release it from
the casing aperture.
Opening the NRT/NRM Casing
With the casing removed, hold the end plate and turn over the assembly to reveal the
battery.
WARNING
: Care should be taken when handling lithium batteries as misuse may cause
damage to the NRT/NRM or, the battery cells may explode.
Ensure that the battery terminals are NOT shorted and that there are no loose wires in the
vicinity the battery.
Remove the battery from its holder.
With the end plate facing away from you, the SIM socket is located on the right-hand
corner of the main board.
NRT/NRM main board; battery removed, showing SIM cover/socket
