Unicum NERO TOUCH User Manual Download Page 90

Page: 90 / 115

User manual for NERO TOUCH, NERO TOUCH INSTANT

page 90

Version 1.1 / December 2017

ТМ

9.1.14.4 Coins

Here is represented information about coins: separately for each denomination, the amount of coins in

the coin acceptor and in the cash box, the amount of coins after the last reset and during the entire period

of machine operation, amount of dispensed coins and filled coins.

Fig.9.28 - Statistics (Coins)

9.1.14.5 Bills

Fig.9.29 - Statistics (Bills)

Here is represented information about cash, similarly like item Coins (see above).

Information is shown if bill acceptor is installed and operates properly

9.1.14.6 Errors

Fig.9.30 - Statistics (Errors)

Here is represented information about errors: name, time and date, amount, actuality.

Summary of Contents for NERO TOUCH




















































































































Search results

Summary of Contents for NERO TOUCH

Reviews:

Related manuals for NERO TOUCH

Brands by name

Popular brands

Unicum NERO TOUCH, User Manual

Search results

Summary of Contents for NERO TOUCH

Reviews:

Related manuals for NERO TOUCH

Brands by name

Popular brands