Unicum NERO TOUCH User Manual Download Page 71

Page: 71 / 115

User manual for NERO TOUCH, NERO TOUCH INSTANT

page 71

Version 1.1 / December 2017

ТМ

Fig.9.14.2 - Recipes

Fig.9.14.3 - Recipes

Buttons (7):

Test Drink

- The machine performs operations for preparing the selected beverage.

Test Water

- The machine performs operations for preparing the selected beverage without adding ingredients.

Test Powder

-The machine performs operations for preparing the selected beverage without adding water.

This test allows removing mixer weighed amount of powder, which is used for the preparation of a beverage.

Test Coffee

- The machine performs operations for preparing the selected beverage without adding water and

soluble ingredients.

When there’s more than one ingredient in the recipe, the button

(1)

appears on the screen for the ingredient re-

moval (see fig. 9.14.2).

Summary of Contents for NERO TOUCH




















































































































Search results

Summary of Contents for NERO TOUCH

Reviews:

Related manuals for NERO TOUCH

Brands by name

Popular brands

Unicum NERO TOUCH, User Manual

Search results

Summary of Contents for NERO TOUCH

Reviews:

Related manuals for NERO TOUCH

Brands by name

Popular brands