User manual for NERO TOUCH, NERO TOUCH INSTANT
page 104
Version 1.1 / December 2017
ТМ
11.2.1.6 Cappuccinatore (fRESH MILK option)
ATTENTION! The cappuccinatore washing should be conducted at least once a week or
oftener, depending on the service conditions!
1. Switch the vending machine off by turning the switch at the rear wall to the “0” position.
2. Open the door.
3. Remove the cappuccinatore from the vending machine carefully, by disconnecting the steam and
milk supply tubes.
1
2
3
4
5
4. Disassemble, clean and assemble the cappuccinatore (see fig. 11.2):
• by simultaneously turning and pulling on the part (1);
• then simultaneously turning and pulling on the part (2);
• separate the parts (3, 4 and 5);
• wash all cappuccinatore parts by flowing warm water.
5. The cappuccinatore assembling is conducted in the reverse order.
6. Install the cappuccinatore into the vending machine and connect it in accordance with
the hydraulic circuit.
Note: It’s permissible to use the washing agents applicable for plastic tableware.
It’s permissible to use soft bottle-washing brushes.
Fig.11.16 - Cappuccinatore
