Unicum NERO TOUCH User Manual Download Page 41

Page: 41 / 115

User manual for NERO TOUCH, NERO TOUCH INSTANT

page 41

Version 1.1 / December 2017

ТМ

6.2 Quick access keypad

The machine has a quick access keypad, which has 4 (four) buttons and two USB-connectors. This key-

pad is installed on the inner side of the machine’s door (see fig.6.2 and 5.2 pos.10).

Fig.6.2

•

Operator’s menu

- access to operator’s menu

•

Technician’s menu

- access to service engineer’s / technician’s menu

•

flushing

- access to menu option for flushing the vending machine’s various units

•

Test

- allows you to make a drink without paying, for purposes of checking drink quality and setting it

•

USB PC -

the connector for connecting a USB flash drive to the vending machine PC (Monoblock)

•

USB MB

- the connector for connecting a USB flash drive to the controller board (Main Board)

operator technician

flushing

test

USB PC

USB MB

6.3 Touch screen

Fig.6.3

The touch screen is located on the front side of the vending machine door. There’re 10 icons with the

images of drinks on the screen (see fig. 6.3). Each button corresponds to a drink, specified in the vending

machine planogram

The touch screen in the vending mode is used for selecting drinks.

In maintenance mode, the touch screen is used for adjusting the vending machine settings and display-

ing the technical information.

Summary of Contents for NERO TOUCH




















































































































Search results

Summary of Contents for NERO TOUCH

Reviews:

Related manuals for NERO TOUCH

Brands by name

Popular brands

Unicum NERO TOUCH, User Manual

Search results

Summary of Contents for NERO TOUCH

Reviews:

Related manuals for NERO TOUCH

Brands by name

Popular brands