5686G-PRO User Guide
Page
64
of
94
Copyright © 2018 USR, a Division of UNICOM Global
Command
Function
+ETBM=n,m,l
Set call termination buffer management. 0,0,0 is the only valid combination,
which means the modem discards all buffered data when the call is
terminated.
n=0
This parameter is always set to 0.
m=0
This parameter is always set to 0.
l=0
This parameter is always set to 0.
+ETBM?
Display cETBM setting.
+ETBM=?
Display list of valid +ETBM settings.
+ILRR=n
Set local rate reporting.
Use this command to display or hide the local rate
report result code. The rate report is an intermediate result code ,
transmitted after any modulation, error control, or data compression
reports, and before the final result code (e.g., CONNECT).
n=0
Disables the local rate report.
n=1
Enables the local rate report.
+ILRR?
Display cILRR setting.
+ILRR=?
Display list of valid +ILRR settings.
+MR=n
Set modulation reporting mode.
Use this command to hide or display the
modulation report. The modulation report is an intermediate result code,
transmitted after the modulation and the rate have been determined, and
before any error control or data compression reports or the final result code
(e.g., CONNECT).
n=0
Turns off the modulation report.
n=1
Turns on the modulation report.
+MR?
Display cMR setting.
+MR=?
Display list of valid +MR settings.
