5686G-PRO User Guide
Page
41
of
94
Copyright © 2018 USR, a Division of UNICOM Global
Register
Default
Function
S41
0
Sets the number of allowable remote-access login attempts, thus enabling or
disabling remote access.
The default setting of zero allows no remote login attempts, disabling remote
access. A value of 1 or greater enables remote access. If the number of
unsuccessful login attempts exceeds the limit set by this register, the Courier
Lite 56K Business Modem returns online and any further login attempts during
the remainder of that connection are refused.
S42
126
Stores the ASCII decimal code for the remote-access escape character. The
default character is a tilde (~).
S43
200
Sets the duration, in fiftieths of a second, of the guard time for the remote -
access (~~~~) sequence.
S44
15
Sets the duration, in seconds, of the interval between losing carrier and
reestablishing a connection.
S51
0
Bit-mapped register. See the beginning of this section for information about
setting bit-mapped registers.
Bit
Value
Result
0
1
Reserved
1
2
Reserved
2
4
Reserved
3
8
Reserved
4
16
Reserved
5
32
Reserved
6
64
Disable Selective Reject
7
128
Reserved