INSPECTION AND SERVICE
1-32
When working in a group, have a leader and follow his
instructions
Before starting inspection, shut off the engine
Engine-powered trucks
Make sure the engine is shut off before trying to start inspection or
maintenance.
Before starting inspection, turn off the key switch
Electric trucks
Make sure to turn off the key switch before trying to start
inspection or maintenance.
Unless otherwise specified, shut off the engine
Engine-powered trucks
Unless otherwise specified, inspection or maintenance should be
performed with the engine shut off.
Unless otherwise specified, turn off the key switch
Electric trucks
Unless otherwise specified, inspection or maintenance should be
performed with the key switch turned off.
Before starting inspection or maintenance, place the
control levers in neutral
Make sure the forks and other attachment (if any) are
on the ground
If unavoidable to work under raised forks or
attachment, use a stable support under the inner mast
and/or the carriage to prevent the forks or attachment
from falling down unexpectedly
Do not put your feet under the forks
Summary of Contents for FD160-2
