Programming setting
50
7.7.6 - GENERAL THERMOSTAT ALARM
Should the pellet safety thermostat detect a temperature higher than the triggering threshold, it intervenes switching the feed
screw off (in series with its power supply) and simultaneously, via the terminal AL1 in CN4, allows the controller to acquire this
status change. The message “
ALARM SAFETY FAIL
” appears and the system is stopped.
7.7.7 - FLUE GAS INTAKE FAN FAULT ALARM
In the event of a failure of the flue gas intake fan, the heat stove stops and the message
ALARM FAN FAIL
appears as in the
following figure.
The extinction procedure is activated immediately.
fig. 46
fig. 47
12 : 42
ALARM
SIC
22°C
12 : 42
ASPIRAT
GUASTO
22°C
