Programming setting
4 3
7.5.7 - CHANGING WATER TEMPERATURE SETTING
To change the water temperature, just select the WATER SETTING MODIFICATION mode by pressing key 6.
Then press keys 1 and 2. The display shows the current temperature SETTING status.
7.5.8 - THE ROOM TEMPERATURE REACHES THE SET TEMPERATURE
(SET temperature)
When the room temperature has reached the set value, the heat output is automatically brought to the minimum value,
MODULATION condition.
N.B. This is only possible if the bridge of the room thermostat behind the heat stove has been removed.
If the STANDBY mode has been activated, STILE 27 switches off; namely is placed in STANDBY, with a 5 minute delay and after
having exceeded the value (T
SET
+ 2°C).
fig. 31
fig. 32
SET TEMP
valore impostato
dialogo
ACQUA
55°C
dialogo
orologio
temperatura ambiente
16 : 40
27°C
LAVORO
potenza
P-2
MODULA
set value
dialogue
dialogue
clock
output
room temperature
