Programming setting
2 9
7.1 - USING THE PRODUCT
Before describing in detail how to operate the product, we remind you that it is mandatory to respect the relevant national and
local provisions, rules and laws in force.
To better understand how to operate the product, we have provided diagrams accompanied by an in-depth description of the
remote control and the programming modes of the product, as well as operations to be performed to commission STILE 27.
STILE 27 is lit very easily. After having connected it to the household electric mains, press the ON/OFF key only after having
properly connected the product to an adequate water system (see our installation guidelines).
It is strictly forbidden to operate STILE 27 without having properly connected it to an adequate water
system, or else the warranty shall be terminated.
The first few times that the heat stove is lit, there could be vapours and bad smells of the painted parts.
These problems are intrinsic to the chemical stabilising process of the special paint used. Therefore the
room must be well ventilated during this phase.
Remember that the appliance must always operate with the combustion chamber door closed.
Though the surface temperatures which our appliance reaches are not extremely high, we recommend
the utmost attention and caution when touching it. The outer surfaces of the combustion chamber in
particular can become red-hot ensuing intensive use.
Place the outermost clearance point of the heat stove 80 cm from combustible and/or flammable material.
If this distance cannot be maintained, a thermal protection should be arranged (UNI 7129, UNI 10683).
To avoid the onset of malfunctioning which could in turn be a source of damage to persons or objects,
we recommend avoiding switching the appliance on and off suddenly and continuously, but to follow
the timetables foreseen by the manufacturer for these operations.
We also recommend thoroughly cleaning both the chimney and the flue gas fitting (at least once during the
whole season of operation) to avoid the risk of a fire.
The appliance must operate with the ash pan hermetically shut.
We recommend to avoid operating the heat stove with an instable electric power supply; continuous
blackouts could cause malfunctioning.
PROGRAMMING
SETTING
7
