14
Installation instructions
3
INSTALLATION
INSTRUCTIONS
3.1 - GENERAL WARNINGS
ATTENTION!
This heat stove is intended solely for the
use for which it was expressly designed.
Any other use is to be considered improper
and therefore dangerous.
This heat stove heats water to a
temperature lower than the atmospheric
pressure boiling temperature.
ATTENTION!
The appliances are designed to be installed
inside suitable rooms or technical spaces
only. The appliances cannot be installed or
operate outdoors. Outdoor installation can
cause malfunctioning and be dangerous.
Choose specifically designed appliances for
outdoor installation.
Before connecting the heat stove, have
professionally qualified personnel:
a) Thoroughly wash all the piping of the system
to remove any residue or impurities which
could jeopardise proper operation of the
heat stove;
b) Check that the chimney/flue has an
appropriate draught, without any
bottlenecks, and that no exhausts from other
appliances are inserted, unless the flue has
been implemented to accommodate several
utilities according to specific standards and
prescriptions in force. Only after this check
can the fitting between the heat stove and
chimney/flue be mounted;
ATTENTION!
The appliance must be installed by a
qualified technician with the technical-
professional requirements according to law
46/90 who, under his own responsibility,
guarantees compliance with standards
according to good practice rules.
The heat stove must be connected to a central
heating system and/or domestic hot water
production network compatible with its efficiency
and output.
