Figure 6-29 Cursor Menu for Voltage Measurement
Table 6-16
Menu
Settings
Description
Type
Voltage
Use the cursor to measure the voltage
Mode
Independent
Tracking
Move each cursor independently
Move two cursors simultaneously and keep
Δ
V
unchanged
Func Switch
Channel
Trigger
Cursor
Use arrow buttons to set the target to channel
waveform;
Use arrow buttons to set the target to trigger level;
Use arrow buttons to set the target to the cursors,
press SELECT to select between Cursor 1 and Cursor
2.
6.10 Interface Setup
To set up the display interface for the Oscilloscope, do the following:
1. Press SHIFT, shift icon shows on uppert right corner of display.
2. Press CONFIGURE to enter into diplay configuration menu;
Table 6-17
Functional Menu
Settings
Description
Language
Multilingual
To select the desired language
Style
Classic,
Traditional,
Modern,
White&Black
To select display style
Menu Display
------
To set up waiting time before the manual turns off: 5s,
10s, 20s, Manual, Manual—the menu will not turn off
automatically, use OK to turn it on/ off.
System Info.
------
To display oscilloscope model, hardware version,
software version, etc;
66
UTD1000L User Manual
