There are two options available for measuring Type in cursor menu: Voltage and Time.
When measuring voltage, use SELECT and arrow buttons to adjust the locations of two cursors in order to
measure
Δ
V parameter, do the same with
Δ
t measurement.
Voltage/Time Measurement Tips
: Cursor 1 and Cursor 2 shows simultaneously on the screen, use arrow
buttons to remove the cursors and press SELECT to choose and adjust the desired one. Displayed readout is
the voltage or time between two cursors.
When the cursor function turns on, measuring values can be automatically shown on upper left corner of
the display.
Figure 6-28 Cursor Menu for Time Measurement
Table 6-15
Menu
Settings
Description
Type
Time
Use the cursor to measure the time
Mode
Independent
Tracking
Move each cursor independently
Move two cursors simultaneously and keep
Δ
t
unchanged
Vertical Unit
Sec
Hz
measurement parameter is time
measurement parameter is frequency
Func Switch
Channel
Trigger
Cursor
Use arrow buttons to set the target to channel
waveform;
Use arrow buttons to set the target to trigger level;
Use arrow buttons to set the target to the cursors,
press SELECT to select between Cursor 1 and Cursor
2.
UTD1000L User Manual
65
