4.5 Using Functional Menus
The procedures below show you how to select functions with use of oscilloscope menus;
1. Press any functional button on the keypad, then corresponding options will show on the bottom display,
you can select one of these options with use of F1 ~ F4. After that, press OK button to hide functional
menus;
2. For the buttons printed with multiple functions, if you want to choose one of these functions, please
press SHIFT button first, accompanied by shift icon on upper right corner of display, then press the
corresponding button to obtain the function you want.
4.6 Hiding Menus
Press down OK button to hide all button icons and menus. To display menus or button icons, press OK
again.
Note: To set up auto hiding time for menus, please find corresponding option in
CONFIGURE menu.
Figure 4-3 Hiding Menus
4.7 Making Connections for Probe Compensation
Connect the signal as follows:
1. Connect the probe connector to the Oscilloscope input terminal and switch probe factor to 10× on the
probe.
2. You also need to set up probe factor on the Oscilloscope, this factor changes vertical scale and ensures
the accuracy for measurements. To set up the probe factor on the Osciloscope, press CHANNEL button,
then F3 to set probe factor to10×.
16
UTD1000L User Manual
