User’s Manual MSO/UPO2000 Seri es
87 / 137
Instruments.uni-trend.com
in screen part of the oscilloscope, such as
a. drag waveform cursor to adjust the vertical position of the waveform; drag the trigger position cursor to
adjust the trigger position.
b. click the channel to switch turn on/off the current channel
c. user mouse wheel to adjust the amplitude volts/div scale in the channel
d. user mouse wheel to adjust the time base scale in time base position (M)
e. slide left right to adjust the pretrigger position in D display area. Click the trigger delay to move the
pretrigger position to the center of the screen.
f. click menu to adjust the setting option directly
The internet setting information of the oscilloscope, as shown in Figure 13-9.
Figure 13-9
(2) Access Outer Network
a. Plug the network cable into the oscilloscope and the network can be access internet
b. Open frp proxy service on the server
c. Configure the oscilloscope frp proxy IP and port
d. The browser can access the proxy IP:9000 port, and the access interface LAN is consistent.
Note
: This oscilloscope uses frp intranet penetration way to achieve external network access. frp use version
is 0.34.0. This machine with frp-0.34.0 client, it need use with the server, the server needs to open
frp server, the client connects to the frp server port is 7000, so the server needs to configure
bind_port = 7000
(3) Network Parameter Setting
a. Local area network setting
It should log in to access the internet setting of the oscilloscope, web user name and password see
Utility/System Information. The setting interface as shown in Figure 13-10.
