User’s Manual MSO/UPO2000 Seri es
112 / 137
Instruments.uni-trend.com
17.1 Enable Function/Arbitrary Waveform Generator
Enable functional /arbitrary waveform generator via AWG,
as shown in Figure 17-1.
Figure
17-1
(1)
The
①
on the above figure is CHA/ CHB information
：
The currently selected channel will be highlight.
(2)
“Limit” represents output amplitude limit, white is valid, gray is invalid.
a.
“HighZ” represents the match impedance of output port is high resistance (it can select Highz or
50. The factory setting is High).
b.
“
” represents the currently sine wave.
（
In different operating mode, it may be “fundamental
wave” “modulating” “OFF” ).
(3)
The
②
on the above figure is waveform reference list: Display the parameter of waveform in the list
format. If an item in the list is in white, then it can use menu operating soft key, numeric keyboard,
direction key or Multipurpose knob to adjust the parameter. If the base color of the current character
is the color of the current channel (It is white when the system is in setting), which represents the
character is in the editing state and can be set with the direction key (as shown in Figure 17-2) or use
the numeric keypad or Multipurpose knob to set the parameter.
Figure 17-2
Stop/Delet
pause /
playback /Select
Record/move right
