User’s Manual MSO/UPO2000 Seri es
73 / 137
Instruments.uni-trend.com
USB
Press REF, loading the waveform from external USB storage device.
Load
Press REF to pop out the select file frame, adjusting Multipurpose to select file
Delete
Turn off the current REF waveform.
The callback REF waveform is shown in Figure 12-1.
Figure 12-1
After the callback, the Ref waveform status will be displayed in the lower left corner, including time base
scale and amplitude scale. User can use the VERTICAL and HORIZONTAL control knob to adjust the Ref
waveform position on the screen and the time base scale and the amplitude scale.
Remark
Only when the oscilloscope is connected to an external USB storage device, user can select the
disk as USB, and then save the settings to the USB storage device. When the USB storage device
is not connected, it will prompt “Detect USB device is failed.”
12.3 Print Screen
The PrtSc key can be used to store the current screen in PNG format to an external USB storage device. The
bitmap can be opened directly on the PC. This function can only be used when external USB storage device
is connected.
12.4 Arbitrary Waveform Storage and Loading
Table 12-4 Arbitrary Waveform Menu
Function Menu
Setting
Description
Type
Arbitrary Waveform
Source
CH1,CH2, CH3, CH4
Set which channel waveform to be saved.
Disk
Local
Press save key, the arbitrary waveform will be saved in oscilloscope
