User’s Manual MSO/UPO2000 Seri es
62 / 137
Instruments.uni-trend.com
area
User-defined
A user-defined parameter selection interface pops up on the
waveform display area, adjust the Multipurpose knob to select and
press the knob to confirm to show the parameter on the screen.
Press the user defined key again to close the user-defined
parameter choice box.
Measurement
Statistical
Analysis
OFF
Turn off measurement statistical function
Extremum
Automatic calculates and displays the current user defined
parameters, the average, maximum, and minimum.
Only enabled when user defined parameters display on the screen.
Difference
Automatic calculates and displays the current user defined
parameters, the average, standard deviation and measurement
times.
Only enabled when user defined parameters display on the screen.
Automatic Measurement Menu (Page 2)
Function Menu
Setting
Description
Selection
Indicator
Press Multipurpose knob to select the parameter of selection
indicator.
Indicator
Off
Turn off the indicator function
On
Indicate the physical significance of the indicator parameter
intuitively by line
Delete
Clear all the user-defined parameter
8.3 All Parameter Measurement
Press MEASURE to pop out all parameter to measuring all parameters, as shown in Figure 8-1.
