32
/
99
Figure 6-7
6.6 Trigger Holdoff
Trigger holdoff is used for viewing complicated waveform (such as pulse string). Holdoff time refers to the
time that the oscilloscope waits to restart the trigger circuit. During hold off, the oscilloscope will not trigger
until the end of holdoff time. For example, a group of pulse string, it requires that trigger the first pulse
string and the hold off time can be set as width of pulse string, as shown in Figure 6-8.
In HORI MENU, use multipurpose knob and numeric keyboard to set hold off time. Time range: 100 ns
~10 s.
Figure 6-8
