67
/
99
11. Display System
11.1 Waveform Display Setting
DISPLAY
can set the display type of waveform, XY, grid brightness, waveform brightness, duration
time, color temperature, anti-color temperature.
(1) Display Type
①
Vector
：
This mode provides the most realistic waveform in most cases and makes it easy to
view the steep edges of the waveform (e.g. square wave).
②
Point
：
Displays sampling points directly.
(2) Grid
Grid type can be set in the DISPLAY menu, which includes full display, grid, crosshair and frame.
(3) Grid Brightness
Rotating multipurpose knob to set the grid brightness, the default value is 40%
.
(4) Waveform Brightness
Rotating multipurpose knob to set the waveform brightness, the default value is 50%.
(5) Backlight Brightness
It can set the screen backlight brightness, rotating multipurpose knob to set the brightness, the
default value is 50%.
(6) Duration Time
Duration time of waveform can be set to the minimum value, 50ms, 100ms, 200ms, 500ms, 1s, 5s,
10s, 20s, infinite afterglow, the default value is the minimum.
(7) Color Temperature
It can intuitively reflect the probability of the occurrence of waveform signals. The waveform with high
frequency is displayed in warm color, and the waveform with low frequency is displayed in cold color.
(8) Anti-color Temperature
Anti-color temperature is the opposite of color temperature function, it takes effects when the color
temperature function is enabled.
(9) Menu Display
Set the time of menu display, which can set to 5s, 10s, 20s and manual.
(10) Transparence
Turn on transparence in display menu, set the pop-up frame whether is transparence, it can set to on or off.
