8
MANUAL - SOLVENT RECYCLERS - URS500, 600, 500EP2, 600EP2
Revision 2019-07
Connect the end of the hose with the “Solvent In” label to the “Solvent In” port on the recycler. Hand tight-
en. Connect the other end of the hose to the 3 ft suction pipe using the hose clamp. Insert the 3 ft suction
pipe into the drum / container of dirty solvent. Connect the other hose with the 4 3/8” suction pipe to the
“Solvent Out” port on the recycler and place the suction pipe into a clean drum / container large enough to
receive the clean, recycled solvent.
Air Supply:
The blue airline and Tee are for use with an “E” series spray gun cleaner to allow one air supply to feed
both the spray gun cleaner and the solvent recycler. It is not used in this situation. If necessary, connect a
Moisture Filter (not supplied) directly to the Air Input port of the Solvent Recycler and attach a suitable Air
Supply Fititing (not supplied).
2) Transferring Solvent To and From a Drum / Container
2) Stand-alone Operation
Not Used for Stand-Alone Operation,
no connections are necessary
Attach Air Supply
fi tting (not supplied)
and/or Moisture Filter
(not supplied)
