Mirage M-‐160 Installation and Maintenance Instructions
12
7.2 Repairs
The table below lists some of the tools needed to service an M-‐160 sprinkler
No.
Description
Part Number
1
#5mm Allen wrench
N/A
2
13mm Socket
N/A
3
3/8” 10” & 12” extensions
N/A
4
Face Hole Tool
ZB 98236
5
Large pair of Channel Locks
N/A
6
Pair of Long Needle Nose
Pliers
N/A
7
Support for Internal
Subassembly
RT 25078
8
Center bolt
RT 25076
9
#20 Torx Screwdriver
N/A
For the following maintenance and repair work the internal sprinkler subassembly must be
removed.
1.
Locate and unscrew the 2 (qty) Allen-‐head fasteners that secure the top of the M-‐
160 to the internal drive subassembly. Use a #5mm Allen wrench.
2.
Remove the 8 (qty) fasteners located down inside the sprinkler body. Use a 13 mm
socket with one or more extensions as shown in Figure 12-‐1.
3.
Carefully remove the internal sprinkler subassembly out of the housing.
4.
The outer body will also detach from the side-‐inlet portion of the sprinkler.
Removing the Internal Sprinkler Subassembly
Figure 12-‐1
