Table of Contents
Index
✔
Customize the Energy Saver control panel settings to put your sys-
tem to sleep and shut it down at a pre-selected times. See “Energy
Savings” later in this chapter.
✔
You can also use a “screen saver” program, which dims or varies
the image on the screen when the computer has been idle for a
specified period of time. These programs are available from inde-
pendent suppliers and user groups. (See “Energy Savings” later in
this appendix. )
✔
Make sure that the ventilation openings on the computer and the
display are clear and unobstructed.
✔
Do not place a display larger than 17” on top of your SuperMac
J700 computer.
✔
If there is interference on the display’s screen or on a television
or radio near your computer, move the affected equipment farther
away.
Handling the Keyboard
Take care not to spill any liquid on the keyboard. If you do, turn off
your computer immediately.
✔
If you spill liquid that is thin and clear, unplug the keyboard,
turn it upside down to let the liquid drain out, and let it dry for
24 hours at room temperature. If, after you take these steps, the
keyboard doesn’t work, take it to a qualified service provider for
repair.
✔
If you spill liquid that is greasy, sweet, or sticky, unplug the key-
board and take it to a qualified service provider for repair.
Ejecting a Disk
For instructions on ejecting a floppy disk, a CD-ROM disc, or other
removable media, see the “Disks” topic of Macintosh Guide, available
in the Guide menu.
If you can’t eject a floppy disk, try in the following order:
✔
Hold down the Command and Shift keys and press the number l key
on your keyboard to eject a disk in the internal disk drive.
✔
Turn off the computer. If the disk isn’t ejected, then hold down the
button on your mouse or other pointing device while you turn the
SuperMac J700 computer on again.
