um Unverferth 2750, Operator'S Manual And Parts Catalog, Page: 62 / 112

3-16
Assembly
7. Feed wire harness (902155) through tube
with hydraulic hoses (see fi gure 6) and follow
along hydraulic hoses on opposite side of
tube (see fi gure 7). Secure using provided
cable ties (9000106).
FEED WIRE
HARNESS
THROUGH
TUBE
ROUTE WIRE HARNESS ALONG
WITH HYDRAULIC HOSES
8. Remove spiral wrap securing hydraulic hoses,
run wire harness along hydraulic hoses and
secure by rewrapping spiral wrap around
hydraulic hoses and wire harness. See
fi gure 8.
9. Connecting wire harness depends on the Model
of your Seed Runner, see below:
A. If Seed Runner is equipped with a
master key switch, connect wire harness
to a power lead from the switch. Wind
up extra wire harness, secure with cable
tie and lay in the bottom of the pan.
See fi gure 9.
SPIRAL WRAP WIRE HARNESS
WITH HYDRAULIC HOSES
B. If Seed Runner is equipped with either
radio remote system, route wire harness
around frame, secure harness with
cable ties as needed and connect to
a lead on the radio remote box. See
fi gure 10.
CONNECT WIRE
HARNESS TO
RADIO REMOTE
SYSTEM
CONNECT WIRE HARNESS TO
MASTER KEY SWITCH
FIG. 6
FIG. 7
FIG. 8
FIG. 9
FIG. 10