um Unverferth 2750, Operator'S Manual And Parts Catalog, Page: 22 / 112

Operation
1-10
IMPORTANT: Do not release tension from ratch-
ets once they are set. They should only be
released when removing tarp from box.
1. To operate tarp, remove retaining pin from
crank holder. With both hands, carefully re-
move crank from the holder. Extend crank
handle assembly to a comfortable operating
position at back of box. Roll tarp entirely to the
open or closed position. Proceed by placing
crank in holder and reinsert pins.
2. Always use adequate caution when operating
tarp.
3. Make sure nobody is on or near the tarping
system while operating tarp.
4. Always use both hands with feet on a solid sur-
face while operating the tarp.
TARP
5. Do not exert extreme force to roll tarp open or
closed. If tarp is covered with grain or snow, it
must be removed before operating.
6. End caps must be free from grain that may be
piled on them.
7. Tarp should be fully closed when in trapsort.
8. Insert snap pins whenever removing or placing
crank in holders.
9. Periodic preventive maintenance should be
practiced to maintain the tarp’s ability to function
and prolong its life. Inspect tarp and hardware
often for abrasions or loosened bolts that may
need to be adjusted and/or repaired. Check
cables for wear and adjust tension whenever
needed. Make all appropriate repairs or adjust-
ments immediately before serious damage oc-
curs.