um Unverferth 2750, Operator'S Manual And Parts Catalog, Page: 27 / 112

1-15
Operation
AUTO-SHUTDOWN FEATURE FOR UM 2510 ONLY - OPTIONAL
1. Turn on the UM2510 Electronic Scale. The
scale only allows increments of 10 lbs. Enter
the desired amount of product to be dispensed,
then press [Enter].
2. The scale will fl ash “PRESET”. Use either
the corded control or the radio remote to turn
on the conveyor. Once the conveyor has dis-
pensed the programmed amount of product it
will automatically turn off.
3. To dispense the preset amount again press the
conveyor control button once turning the con-
veyor off. Press the button again turning the
conveyor on. This cycle can be repeated as
many times as necessary.
NOTE: If the conveyor is shut off in the middle
of a weighing cycle it will stop the preset
function and the scales will return to normal
operation.
OPTIONAL LIGHT KIT
Turning light on/off:
1. Turn light on/off using the button on the light or
by turning the key on or off. Aim light to best
illuminate work area.
IMPORTANT: When not using light for long
periods of time, make sure light is turned off.
If left on battery may be drained.
ON / OFF BUTTON
Revised 082310-1