Ulvac MBS-C, Instruction Manual

Page: 30 / 36

CRYO METER MBS-C Instruction Manual
18 ULVAC CRYOGENICS INCORPORATED
Supplement 2. Attachment, and Option cables
The following shows all the types that are available for connecting to MBS-C.
(Note)
K-thermocouple plug for wiring is attached to MBS-C in any case
(Option cables)
Check and order the cable shown below if you ne g shown above is not attached when you
select any option cable.
ed. The I/O p
(cover). Another
rated the parts to out of
lu
(Note1) “(New)” means that it is different with the hood specifications are similar as before.
The change is caused that the vendor ope production.
ote2) Note th
you choose MBS-compatible Cable an he MBS-MBD connecting cable set is required.
(N at MBD-HS30 requires self-wiring of the connector for contact signals of MBS-C.
Table 2-A Example: Another combination of MBS-comp
page.
atible Cable
If you would not, you can choice MBD-HS31. It has already contact signal lines. See next
If
d MBD, t
See Table 2-A. In this case, only R03-P5M plug for contact signals is used.
I/O
Old
New
K thermocouple
(Standard Attachments)
MBS-MBD Connecting Cable Set
Refer to Table 2-A
R05-P2F
R03-P2F
R03-P5M
R03-P3M
R03-P5M
MBS-compatible Cable
(R03-P2F)
(R03-P3M)
(Refer to Supplement 1)
MBS-compatible Cable
Type GP-HM30
MBD - MBS-C Cable Type MBD-HS30
New
Old
Attached plug
Attached plug