Ulvac MBS-C, Instruction Manual

Page: 16 / 36

CRYO METER MBS-C Instruction Manual
3. Connector Specifications
Shown below are the locations of MBS-C connectors and signal names.
Figure 3-1 MBS-C Bottom View
(Front Side)
(Rear Side)
Table 3-1 Pin assignments and signals
Symbol Model
Pin
No.
Signal Name
Pin
No.
Signal Name
I/O
D-SUB 15 pins
DA-15PAF-N
(JAE) or
equivalent
1 N.C. 9 N.C.
2 Analog ) 10 Analog Output (-)
3 N.C. 11 N.C.
4
Contact Output 1:
20K or less
12
Contact Output 1:
20K or less
5
Contact Output 2:
280K and above
13
Contact Output 2:
280K and above
6 Input Power (24V) 14 Input Power (0V)
7 N.C. 15 N.C.
8 FG(Frame Ground)
K(CA)
R05-R2M (TAJIMI) A K thermocouple output (+) B K thermocouple output (-)
Listed below are appropriate connectors for cable wiring.
Table 3-2 Connectors for wiring
Symbol Specification
(*2)
I/O
Connector for
IO signals
(D-SUB 15pin plug,
Female)
Part Name Part Number Vendor
Original Number
(*2)
Vendor
Plug 0967 015 4715
HARTING
(DA-15SF-N)
(JAE)
Slide lock device
0967 015 0511 (DA51220-1)
Hood 0967 000 9915 (DA51211-J)
K(CA)
K-thermocouple
signal
(Round-shaped
plug) Part Number Vendor
R05-PB2F, or R05-P2F TAJIMI
(*2)
JAE “Hood” has gone into out of production. HARTING model is almost similar to JAE on hood size, and is
similar on plug specifications
4 ULVAC CRYOGENICS INCORPORATED