Ulvac MBS-C, Instruction Manual

Page: 29 / 36

CRYO METER MBS-C Instruction Manual
3. Connecting Procedure to MBS-C
Confirm location and name of the connector by
referring to Figure 3-1.
Make sure that the Slide locking device is at
correct position shown in the figure on the
right side.
Then, insert the plug straightly to the end
position.
According to the figure shown here, push
the right side of the Slide locking device.
Check that the Slide locking device is positioned
shown in the figure with light metallic sound.
It means that the plug is locked to MBS-C.
If you would remove the plug, push the left side of
(Position of Slide
locking device)
(Locked style of the plug)
the Slide locking device for unlocking the plug.
Then, pull the plug to remove it.
ULVAC CRYOGENICS INCORPORATED 17