Ultrak CCU-100HD, User Manual

Page: 80 / 154

PROGRAMMING MULTICALLS
4-12
4.3.3.4 C - Call
The Call function provides four system actions.
1. Call a camera to a monitor
2. Call a camera to an alarm monitor (AM)
3. Call a camera to an alarm VCR (AR)
4. Automatically Acknowledge an Alarm (AA)
NOTE
If the MultiCall is started from the KBD-100A
keyboard, a SHB-100 function key, a JPD-100
function key, the JPD-100 keypad, or date and
time, the alarm monitor, alarm record, and
alarm acknowledge steps of a MultiCall are not
processed by the CCU. These steps are only
processed if the MultiCall is started by an
alarm.
CALL A CAMERA TO A MONITOR
To program the MultiCall to switch a camera to a monitor, perform
the following steps.
NOTE
If the cursor does not automatically move to
the next field after entering data in a field,
press the right gray arrow key to move to the
next field.