Ultrak CCU-100HD, User Manual

Page: 75 / 154

PROGRAMMING MULTICALLS
4-7
The letters of the functions that are programmable are listed at the
bottom of the screen.
Function Descriptions:
P - PreShot
V - VectorScan
M - MultiCall
C - Call (call a camera to a monitor, call a camera to an alarm monitor,
call a camera to an alarm VCR, or automatically acknowledge an
alarm )
A - Auxiliary Output Control On/Off (such as VCRs)
See paragraphs 4.3.3.1 through 4.3.3.5 for the steps required to
program each type of function.
NOTE
When a function is selected, there are messages on the bottom of the screen to
prompt the programmer for the next required field entry.
Enter data in the fields by typing the desired information. The cursor
moves to the next field. If the cursor does not move to the next field,
use the gray right arrow key to move it to the next field. For example,
Enter P in the FUN field means type the letter P in the column
headed FUN . Enter a transit time in the MISC field means type a
number from 0.0 to 9.9 in the column headed MISC. If data is
entered quickly, the screen prompts may not update until the rate of
entry slows down.