PROGRAMMING MULTICALLS
4-6
4.3.2
List Programmed MultiCalls
Perform the following steps to list the programmed MultiCalls.
1.
Press
F11
.
Each time function key F11 is pressed, the next page of MultiCalls
is displayed. An “End of List” message appears at the bottom of
the last page. To return to the first page, press F11.
2.
Press
Esc
when done viewing the list.
4.3.3
Programming MultiCalls
To program a MultiCall, perform the following steps.
NOTE
All commands are entered using the KBD-
100A keyboard.
1. Press
SHIFT F11
on the KBD-100A keyboard.
2. Enter the desired
MultiCall number (00-255)
to program.
3. Enter the desired
title
for the MultiCall
4.
Enter the desired functions
in the order you want the MultiCall to
perform them. Note: the first step is 00.
If all the functions are to be performed simultaneously, the order they
are entered does not matter unless the cameras are called to alarm
monitors and alarm VCRs. If these functions are used, they must be the
first steps in the MultiCall and all but the last step involving alarm
monitors and alarm VCRs must have a zero dwell time.
Summary of Contents for CCU-100HD
