Ultrak CCU-100HD, User Manual

Page: 34 / 154

2-10
CONTROLLER
Pin 3 RX-
Pin 4 5 Volt
Pin 5 GND
Pin 6 TX-
KEYBOARD
Pin 1 Clock
Pin 2 Data
Pin 3 Reset
Pin 4 Ground
Pin 5 5 Volt
2.3.2 Model CCU-100/HD Rear Panel.
The rear panel connectors are defined for specific equipment. See Figure 2-
1 for the system block diagram of the CCU. The following table defines the
equipment type for each channel or COM port.
REAR PANEL EQUIPMENT CONNECTIONS
Channel 1 JPD-100 Joystick Controller
Channel 2 JPD-100 Joystick Controller
Channel 3 JPD-100 Joystick Controller
Channel 4 RS-485 Control Data Output
(FastScan, SmartScan, or CRX500
Series or CRX800 Series Control
Receivers, AIF-100/CO Contact
Output Units)
Channel 5 AIU-100 Alarm Interface Units, SHB-
100 ShotBox Units, and AIF-100/IN
Auxiliary Interface units