30
4.
Using a 19 mm spanner, loosen and remove the hub
axle nuts.
5.
Loosen and remove the
torque arms retention bolt
from the right and left drop
out.
6.
Remove the torque arms
from the A2B by sliding
them off the axle.
7.
Remove the rear wheel by sliding it out of the frame
while disengaging the chain from the freewheel.
Re-installing rear wheel
Reverse the removal instructions (7 -1) opposite.
Re-install the torque arm. Failure to do so will result in
damage to the frame.
Ensure that the rear wheel is properly centred in the
frame before securely tightening the axle nuts to 60 Nm.
Removing rear wheel
1.
Ensure that the power is turned OFF and remove the key.
2.
Remove the cable ties
holding the power cable
to the frame located on
left hand chain stay.
3.
Disconnect the motor
power connector by
unscrewing the cap nut.
