34
11.0 Technical Information
General performance specification
• Overall dimensions: 1790 mm x 695 mm x 1105 mm
• Tyre size: 3.0" x 20"
• Frame size: unisex 49 cm (19")
• Curb weight without battery: 33.9 kg (74.7 lb)
• Curb weight with battery: 37.2 kg (82.0 lb)
• Maximum permitted load: 140 kg (310 lb)
• Maximum permitted load on rear carrier: 10 kg (22 lb)
• Maximum speed in "on road mode", flat level ground,
motor power only: 32 km/h (20 mph)
NOTE:
regulated
• Maximum range, flat level ground, motor power only,
no starts/stops: approx. 32 km (20 miles)
• Hill climbing capability, motor power only, 75 kg (165 lb)
rider, 37.2 kg (82.0 lb) bike, total 112.2 kg (247.4 lb): 5°
•
Operation conditions: Tempe23 °F to 104 °F
(-5 to 40 °C), maximum humidity 80%
Electrical specification, battery
• Battery chemistry: lithium ion
• Configuration: 10S6P
• Nominal voltage: 36V
• Normal voltage operating range: 31 to 41V
• Nominal capacity: 11.4 Ah (410 Wh)
• Maximum discharge: 30 A
• Charging method: CC/CV (Constant current/
Constant voltage)
• Weight: 3.3 kg (7.3 lb)
• Position: in down tube of the frame
Battery management system (BMS)
• Controls and stops over-charging
• Controls maximum charge current
• Controls over-discharge amperage (30 A max)
• Controls over-discharge voltage
• Over temperature shut-off
• Provides cell-to-cell balancing function
Electrical specification, battery charger
• Input voltage: AC 115/230V, 50/60Hz
• Output voltage: 42 ± 0.5 VDC
• Output amperage: 4.0 ± 0.4A
• AC line fuse rating: 10 A
Electrical specification, motor
• Motor type: brushless, gearless
• Motor voltage rating: 36-volts
• Maximum power output: 800 W
• Continuous power output: 500 W
• Maximum torque: 50 Nm
Electrical specification, motor controller
• Control function: current, voltage, temperature,
recuperation, speed, torque, dynamofunction motor
•
Power supply light: 6 V, 7 W
• Position: end of down tube
