29
owner's manual
3.
Turn the adjusting nut on
the right side of the hub
clockwise such that you
feel resistance to closing
the lever when the lever is
parallel to the centreline of
the hub.
4.
Firmly grip the fork with
your left hand, and push
the lever until it is at a 90º
angle to the centreline
of the hub. The lever is
securely tightened when it
takes a significant amount
of force to position it in
the closed position. The
appropriate amount of
force necessary to close
the lever when it is properly adjusted will result in an imprint
of the lever in the palm of your hand. Once closed, the
OPEN designation on the lever will no longer be visible.
When properly closed, it is impossible to move unless you
open it again by reversing the steps above. If you can
easily move it, open the quick release lever and tighten the
adjusting nut another 180º and try again.
Please follow the instructions provided for the quick
release mechanism to ensure proper use. Failure to
properly install this quick release front hub may result in
the front wheel falling off while you are riding. This could
result in serious or fatal injury and/or property damage. If
you are uncertain about any aspect of the assembly and
adjustment of your A2B, ask your Ultra Motor dealer.
5.
Ensure that the brake disc is correctly inserted into the
brake calipers and is correctly adjusted.
If you are unsure about this brake set-up and
adjustment procedure, please take your A2B to your Ultra
Motor dealer or any qualified bicycle mechanic, and ask
for assistance in adjusting the brakes. Improperly adjusted
brakes may cause reduced braking performance, leading
to an accident that could result in serious injury or death
and property damage. DO NOT ride your vehicle if you are
not confident that the brakes are working properly.
