13
owner's manual
5.1 Overview
The A2B has a 'power on demand' function, this means the
motor engages only when the rider twist the throttle.
5.2 Starting and stopping
1.
Put your helmet on and select a quiet area away from
cars, other cyclists, obstacles or other hazards.
2.
Ensure that the power is OFF and raise the kickstand into
the riding position.
Mounting the A2B with the power ON may result in the
inadvertent actuation of the throttle and the A2B will lurch,
potentially resulting in serious injury or death and property
damage. For the same reason, turn the power OFF before
dismounting .
DO NOT sit on the A2B whilst it is supported by the
kickstand, you will damage the kickstand, possibly the
frame.
5.0 Understand your A2B
After having read this section, if you are still unsure, please ask an Ultra Motor dealer to explain any functions or features
that you do not understand before your first ride.
3.
Mount your A2B and get comfortable.
4.
Turn the key to position 'A'
or 'B' if an optional battery is
attached to turn the battery
power ON.
The throttle must be in
zero position while turning
the power ON and will be
activated after 2 seconds.
5.
To apply motor
power twist the
throttle on the right
hand side of the
handlebar gently
toward you.
6.
Test the brakes at
slow speed. Left lever actuates the rear brake and the right
lever actuates the front brake. Put your weight toward the
rear and gently apply the brakes, rear brake first. Sudden
or excessive application of the front brake could throw you
over the handlebars. Applying brakes too hard can lock
up a wheel, which could cause you to lose control and fall.
