UltimateAir 200DX, Manual & Installation Manual

Page: 39 / 52

The UltimateAir® RecoupAerator® 200DX Manual and Installation Guide, March 2014



The UltimateAir’s patented energy transfer wheel contains six removable filter
pie wedges which periodically require replacement. These pies are also known
as ’energy transfer/filtration material’ because they not only filter incoming
air, they also transfer heat and moisture from one air stream to the other
giving the machine the 96% Heat/Energy recovery rating.
1. Disconnect power to the RecoupAerator
2. Unlatch the filter access cover
3. Remove the two rectangular filter cover insert blocks.
4. Remove the long aluminum pre-filter as explained in the Aluminum Pre-Filter
section on the previous page.
5. If the energy transfer/filtration material is dark gray or darker, it should be
hand washed or replaced. Pull out the exposed filter material “pie wedges”,
manually rotating the wheel to access the remaining wedges.
6. Rotate the wheel by hand, making sure that the pieces are completely and
evenly replaced below the level of the spokes so that none drag as the wheel
rotates. Access both sides of the wheel to adjust the wedges.
7. Replace the aluminum pre-filters, rectangular insert blocks, and the access
cover and restore power.