UltimateAir 200DX, Manual & Installation Manual

Page: 41 / 52

The UltimateAir® RecoupAerator® 200DX Manual and Installation Guide, March 2014

1. The wiring remains
connected. Remove the two
screws holding the motor
mount/ drive roller assembly
in place. They are visible and
closest to you. The rear of the
motor mount sits on two snap
top posts.
2. Once the screws are out,
reach in and firmly rock the
motor mount assembly to
unsnap the rear posts.
3. Replace Drive Roller Belt by
stretching and rolling the new belt onto the pulleys.
4. Install motor mount / drive
roller assembly back into the
unit by first snapping the rear
posts, then replacing the two
screws.
5. Install white foam board
then the metal front cover.
6. Operate unit with wheel
visible through top door to
verify rotation.
7.
Replace the filter access
cover
.

