UltimateAir 200DX, Manual & Installation Manual, Page: 38 / 52

The UltimateAir® RecoupAerator® 200DX Manual and Installation Guide, March 2014



Check your exterior weather hoods
periodically throughout the year to
ensure that the fresh air inlet and
stale air exhaust hoods mounted on
the outside of the building do not
become clogged with debris such as
leaves, grass, snow, or nests.
Remove any debris by hand or wipe
out the caps with a dry cloth.

Clean the aluminum pre-filters at least once every six months. Clean more
frequently if necessary. To clean the filters:
1. Disconnect power to the RecoupAerator
2. Unlatch the filter access cover
3. Remove the two rectangular filter cover inserts. They will easily lift free
4. Slide the two aluminum pre-filters out (one from each opening), there is
one long pre-filter and one short pre-filter.
5. Check the pre-filters for build-up. The pre-filters may be cleaned by
soaking in warm soapy water, then rinse. If they are clogged a new set
should be purchase from UltimateAir. Pre-filters should be mostly dry
before reinstalling.
6. Replace the filter cover insert blocks and access cover
7. Restore power to the unit.
To order replacement filtration materials, visit us online at:
www.ultimateair.com